30lb injector question

[driver456]

I ordered 30lb injectors because the stock injectors are hitting 100%.What do I have to change after putting in the bigger injectors?

[redhardsupra]

use the spreadsheet from www.allmod.net/hpt/injectors.xls
and change your IFR accordingly.
the end ;)

[driver456]

Thank you,I'll try and figure that out.

[BACKinBLACK]

ok i need this info too however i dont have microsoft excel so can somebody help me out...

[eboggs_jkvl]

OK, I set it at 30 for the injector size, 58 for fuel rail pressure, and 43.5 for the rated at. If you need different settings, tell me what you have and I'll run it again.

This is what goes into the IFR table {B4001}. If you have bigger injectors, the 30 would change (42, 50, 60 etc)

Elmer

[BACKinBLACK]

thanks mane i greatly appreciate it, that is awesome. Are there any other tables that will need to be changed?

[eboggs_jkvl]

thanks mane i greatly appreciate it, that is awesome. Are there any other tables that will need to be changed?

Probably a few more but that is the starting point. Tell it the injectors that you are using and then tune the trimes to suit your taste.

[driver456]

Thanks guy's..................Paul

[Redline Motorsports]

What about the injector offsets??

[eboggs_jkvl]

What about the injector offsets??


Is there a table that calculates injector offset? If there is, then I'll run it, otherwise, I simply left those stock. Ignorance is bliss sometimes.

I'm very blissful.


E:)