PDA

View Full Version : LML Support



30 RUM
October 31st, 2013, 08:16 AM
I know you guys have been busy with all of the new controllers, but how much longer do you think it will be until we see calibration files for the LML? I have been keeping up with the news letters, so I know we need a file depot for the factory files.

Thnx

Sam

GMPX
October 31st, 2013, 09:44 AM
Hi Sam,

Currently there is a handful of beta testers assisting us with calibration testing, we hope to make an official LML release before the end of November. Everything is going to plan so far.
And just so the internet rumours don't start, this release will not allow DPF deletes, all beta test trucks have full emissions equipment fitted.

30 RUM
November 1st, 2013, 06:23 AM
Thank you for the quick reply.

cokane1
November 24th, 2013, 03:55 PM
I have all the LML calibration files. 2011-2014 with all the different setups/OS, denali, crew cab, ext cab, 4x4, etc etc.

Let me know if anyone needs them emailed..

Chris

KLUG'S SS
November 30th, 2013, 04:34 PM
I have all the LML calibration files. 2011-2014 with all the different setups/OS, denali, crew cab, ext cab, 4x4, etc etc.

Let me know if anyone needs them emailed..

Chris

I do sir!

shayedan
December 3rd, 2013, 06:31 AM
I have all the LML calibration files. 2011-2014 with all the different setups/OS, denali, crew cab, ext cab, 4x4, etc etc.

Let me know if anyone needs them emailed..

Chris

Hi
I need to this cal file
Thanks

06megatuned
March 21st, 2014, 07:32 AM
Cokane1, anyway you could send them my way?

cindy@efilive
March 21st, 2014, 08:23 AM
They are available for download off the internet. Someone posted them on 4shared.com.

06megatuned
March 21st, 2014, 08:23 AM
Thank you.

dice000
May 10th, 2015, 07:19 AM
i cant seem to find the files on 4shared have they expired????

THEFERMANATOR
May 10th, 2015, 08:39 AM
i cant seem to find the files on 4shared have they expired????

Somebody pulled them down. You can buy them from PPEI or RIDGERUNNER if you need them. I'm uploading them to another site, but I only have the 11's up right now.

dice000
May 10th, 2015, 08:43 AM
Can u share the link please?

THEFERMANATOR
May 10th, 2015, 11:32 AM
Can u share the link please?
I've got most all of the files up to 2015, and will be uploading them over the next couple of days. Theres some other LML files already uploaded for 11, 12, and 13 already.
http://www.thetruckstop.us/forum/resources/categories/tuning-library.1/

dice000
May 10th, 2015, 11:49 AM
mint thanks man

LMMPerrona
May 13th, 2015, 01:57 PM
I have uploaded some. Here are the links. They are all compressed in a rar file.

2011- http://rapidgator.net/file/54f73ffababfd5689146a1ac2fbc4d5c
2012- http://rapidgator.net/file/d3c9e0ff464ddd75209502ca175e2e5e
2013- http://rapidgator.net/file/1612f59a3592c9fbdedca65b1b992e0c
2014- http://rapidgator.net/file/c72dea56181c2fbd79eb9f0d2e554d7a
2015- http://rapidgator.net/file/181d30e34004f18952f385e77c954e78

rebel7777
July 15th, 2015, 09:30 AM
I have a 2012 that is a 2 door with the suicide doors, LTZ Z71, which cal would you use out of the 2012's?

THEFERMANATOR
July 15th, 2015, 09:42 AM
I have a 2012 that is a 2 door with the suicide doors, LTZ Z71, which cal would you use out of the 2012's?

Take your VIN number and go to the GM TIS2WEB website, and punch it in. Once you pull it up, it will tell you what all segments your tune file should have in it, you then find a tune file that has those segments, and you have your tune file.

rebel7777
July 15th, 2015, 10:01 AM
Cool that was awesome, covered in the 2012 4d LT LTZ

Programmer
October 22nd, 2015, 08:42 AM
Looking for a stock cal---2012 LGH Express Van
12649331
Slave 12649245
OS 12649244
Engine 12649653
Spd 12649691
Sys 12649689
Fuel 12649679
Diag 12651059
Engine 12651051

Would be very grateful ! The cal is not on the posted stock file links.

Road
October 25th, 2015, 04:50 AM
Is there a ETA for the software support/release for the 2016 LML. I have a company that has 2 on order and expecting delivery mid November. They are wanting both of them calibrated before putting them in service.

Thanks
Mike

cindy@efilive
October 25th, 2015, 10:11 AM
Is there a ETA for the software support/release for the 2016 LML. I have a company that has 2 on order and expecting delivery mid November. They are wanting both of them calibrated before putting them in service.

Thanks
Mike

Flashing is implemented and has been tested. Mapping is underway and testing is expected to commence in the coming weeks.

Cheers
Cindy

GMPX
October 25th, 2015, 10:14 AM
Flashing is completed and working 100% on a 2016 truck, mapping of the new 2016 OS will be finished this week, so probably by the end of this week / early next we will have a software release ready so you'll be fine for mid November delivery.
We've also been putting in 2016 Cummins support in this next release as well.

EDIT: Apparently Cindy and I typed a response at the same time :rotflmao:

Road
October 25th, 2015, 11:26 AM
Thank you