View Full Version : 8.1 PTO tables
Brads_rs
December 19th, 2013, 09:45 AM
Hi all, Im looking for a tune file for 2005 8.1 with pto enabled. I downloaded one from tunefiledepot, but cant find any tables in it for pto. Maybe there are none? First time working with PTO stuff. I have a customer who wants to run water pumps with the 8.1 engine and i thought it would be nice to use the PTO function for high idle around 3600 rpm. Any help would be nice.
Taz
December 19th, 2013, 12:50 PM
I have never used this .... however, I believe the PTO high idle circuits are enabled in all 2001 to 2006 8.1L L18 controllers. Wire a momentary switch from C1 (Blue) pin 31 to ground - this is used to activate the PTO functions. The vehicle must be stationary, and in Park (or Neutral). I believe the Cruise Control stalk switches are then used to control the idle speeds .... an internet search may turn up a manual for this.
Big Mike
December 19th, 2013, 04:58 PM
Every 8.1 file I've ever seen has the provision for PTO in the platform configuration set to "yes", but it still needs flashed with a Tech2 to actually enable it. I have the GM document explaining it all if you'd like to see it. Or if you dig around GM's upfitter site it's Bulletin #53 titled "Power take off & High idle".
Brads_rs
December 20th, 2013, 01:54 AM
Thanks for the info guys, i'll check the uplifter site later today.
Big Mike
December 20th, 2013, 01:59 AM
Here I'll save you the time. :cheers:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.