PDA

View Full Version : Can Flashscan FSP V1.2 be used with V8 of EFI Live



jsm00z28ss
December 26th, 2013, 09:12 AM
Do I need to upgrade from my Flashscan FSP V1.2 to something newer in order to use Efi Live V8 or should I just stay with using 7.5. I know have a 2012 2SS that I want to tune instead of my old 2000 SS.

Taz
December 26th, 2013, 12:47 PM
Gen IV controllers use CAN Bus comms ... you need a V2 for these controllers.

joecar
December 26th, 2013, 03:09 PM
2000 SS -> use V1.2 with latest V7 software (that's all you need).

2012 SS -> need V2 with GM tuning option, and both V7 and V8 software, as Taz said V2 supports CAN Bus.

jsm00z28ss
December 26th, 2013, 03:49 PM
ok thanks I have gotten rid of the 2000 to make way for the 2012 so I guess I have to upgrade then but maybe I can still use the v1.2 with my 03 avalanche

ScarabEpic22
December 27th, 2013, 05:36 AM
You can still use your V1.2 on an 03 Avalanche, however if you upgrade your V1 to a V2, you save a few hundred $$ (it's $499 for upgrade vs $899 outright) and can transfer your licenses over. I.e. if you tuned your 03 Avalanche with your V1 now, and upgraded to a V2 next week you could transfer the license from the V1 to the V2.

jsm00z28ss
December 27th, 2013, 12:54 PM
Plus I have been using the scanner to take a look at the pcm but I have been picking ls1b for the controller type. Is that the correct choice for my 03 avalanche?

joecar
December 28th, 2013, 02:23 PM
Yes, LS1B for the 2003 Avalanche.

cindy@efilive
June 20th, 2014, 08:14 AM
No. FlashScan V1 cannot use V8 software. But it doesn't need to in order to tune vehicles it supports. FlashScan V1 only requires V7 software. Note: from your other threads, FlashScan V1 and V7 software both support .ctz file formats.

Cheers
Cindy

cindy@efilive
June 21st, 2014, 12:53 AM
The knowledgebase article on software covers which software is required for which hardware. It is regularly reviewed, and changes were made to ensure the information is current just a few days ago. https://support.efilive.com/kb_article.php?ref=5404-IJZV-0820

There is also a similar article on the downloads page of our website, below the big icons, and just below the Pre-Release link that explains the differences between the softwares. This information could do with an update to explain the software requirements better. I will update this article next week and link it to the knowledge base article. http://www.efilive.com/latest/cat/download-efilive.

Cheers
Cindy