PDA

View Full Version : JoeCar


warlock007
February 19th, 2014, 02:11 PM
Please read PM and review for me, thank you as always

1641816419
joecar
February 19th, 2014, 03:19 PM
WL007, ok I got your PM... I'll look thru your tune file tonight.
warlock007
February 19th, 2014, 03:55 PM
I need to run another log, I forgot to change all the calc Pids from the vette to avalanche exp: Lookup CLC 260 and CLC 600,

Ill run tomorrow and see what it looks like and post it.
joecar
February 19th, 2014, 04:44 PM
I'm looking thru the file, I can't see why in 4Low the throttle does not respond (did I understand the problem correctly... lol, my coffee ran out)...?
warlock007
February 19th, 2014, 04:59 PM
Can't understand myself, it switches into gear, if I let go of brake it moves forward/reverse but push the gas and nothing happens, stays at idle even with pedal to floor. Nothing.

All others work perfect, is it possible that the last reflash didn't take on just that?
joecar
February 20th, 2014, 07:07 AM
Sanity check: your TB Is DBW, right...?

Try doing a full flash.
warlock007
February 20th, 2014, 07:23 AM
Yes, it's already fixed. Figured it out B2308 was set to 0 per above commit.
joecar
February 20th, 2014, 07:54 AM
WL, I can't find B2308 in your .tun file...
warlock007
February 20th, 2014, 08:12 AM
Yah it's only there when connected to the truck.

I'll see if I can find away to send to you later
joecar
February 20th, 2014, 09:44 AM
Ah... I see it when connected to FlashScan.