PDA

View Full Version : Bully Dog GT Tuner



garrettg.bpd
February 24th, 2014, 01:22 PM
Has anyone had trouble programing after a Bully Dog GT tuner was removed? The Dodge dealer would not reprogram the pcm because it is up to date.

GMPX
February 24th, 2014, 02:09 PM
The dealer can still flash over it, their software even asks them "Are you sure you want to program with the same update".

garrettg.bpd
February 24th, 2014, 02:44 PM
The problem I'v be having is that the dealer wants to charge the labor no mater if the flush the module or not. But when you tell the service writer that they can flash it no mater what. And when you tell them that you would like the high idle turned on they have no idea what you talking about.

garrettg.bpd
February 24th, 2014, 02:59 PM
Would it be safe to flash over with a stock from the tune depot

cmont58
February 25th, 2014, 01:26 AM
I wouldn't see why it wouldn't be safe to start with a clean tune file.

2007 5.9
February 25th, 2014, 01:43 AM
Always best to get a Dealer Flash, especially when Bully (your ECM) Dog is used.