PDA

View Full Version : Auto Cal Issues.



catman3126
March 11th, 2014, 03:50 PM
Was getting an auto cal ready for a person and had it configured for an LBZ and it would not flash it kept giving the $0281 error code. so I configured it for an LLY and tried it on my LLY with an LLY tune and it flashed my LLY without asking to license the controller, was just trying to see if it gave the same error code with an LLY and it flashed the lly and has never even been out of the box before today. so do I get to buy another license to send this autocal or can something be done. my LLY is licensed to my V2 already. the reason I do this before I send them is to make sure they are right and have not had an issue before and have done this before and they have always asked if I want to activate the license. thanks for any help.

Blacky
March 11th, 2014, 06:52 PM
Can you check the licenses on the AutoCal device using the V8 software [F7: Licenses] tab page?
Does it show a used license?

Regards
Paul

catman3126
March 11th, 2014, 08:50 PM
Can you check the licenses on the AutoCal device using the V8 software [F7: Licenses] tab page?
Does it show a used license?

Regards
Paul

Yes it shows the engine side unavailable