PDA

View Full Version : 05 ssr truck e40 ecu no pids avail


Wichita Dyno
March 16th, 2014, 02:48 PM
Currently working on an 05 SSR LS2 Truck and trying to log as always typical pids in the e40 ecu. Nothing othert than temps, (ect iat) and rpm signal available. All other external pids are also available. Can someone help me with this issue? I just hooked up same laptop and software to an 05 Vette and all pids are present. Not sure where to go from here. Thanks

Chris Lovett
Wichita Dyno
chris@wichitadyno.com
TunasTwins
March 16th, 2014, 04:12 PM
Just jumping on here and read this. Someone knows the answer. Good luck cause that seems odd. Quick fix I hope
ScarabEpic22
March 16th, 2014, 05:41 PM
Is the VIN set correctly in the ECM?
Wichita Dyno
March 17th, 2014, 03:49 AM
I was in process of checking that this morning. I will post what I find.
Wichita Dyno
March 17th, 2014, 04:01 AM
Hit the Green Check mark to verify all pids and now everything is fine. I dont understand how it will scan fine on one ecu but not the other. Thanks
ScarabEpic22
March 17th, 2014, 06:38 AM
You need to validate the PIDs on each controller when you connect to it for the first time.