View Full Version : pid not supported
efilivesteven
March 24th, 2014, 01:35 PM
when im trying to do the ( rafpn ) the pid idle air flow correction ac off pn says that it is not supported and I get a line through the name on the map for the desired airflow
Im trying to log the b4307 so I can do the rafpn
Im posting a quick log I made so you can see what im talking about
joecar
March 24th, 2014, 02:51 PM
For the pid CALC.RAFPN you need to select it's prerequisite pids (on PIDs tab, on CALC.RAFPN pid do rightclick->More Info to see which ones).
efilivesteven
March 24th, 2014, 03:20 PM
I did that but there is one pid it is saying that it doesn't support
it says I need these 3 pids
Engine RPM
Engine Coolant Temperature
Idle Airflow Correction AC Off, P/N (Grams/s)
the 3rd one is the one it says is not supported
joecar
March 24th, 2014, 08:02 PM
...
Idle Airflow Correction AC Off, P/N (Grams/s)
...This one is CALC.RAFPN
on it do rightclick->More Info
this pid requires GM.IAC_LTPN_DMA.gps and GM.IAC_STPN_DMA.gps
did you select those 2 pids also...?
efilivesteven
March 25th, 2014, 03:49 AM
No i didnt know about that more info thing on the pids thnx for the help that fixed it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.