PDA

View Full Version : ID850 Injectors Tune



LastCall
March 25th, 2014, 04:42 PM
I am almost done bolting the 2.9 to the LQ9 and plan to start it this weekend. I pulled the technical specs for EFI Live from the ID website. There were a few tables that I did not have figures for and was wondering if what I have will work. The missing data was for:

Injection Timing
Injection Timing Trim
Injector Voltage Correction

I attached a copy of the tune with the data pulled from the ID website. Can someone take a look at it to see if the injector data looks correct?

Thanks in advance!

5.7ute
March 25th, 2014, 06:49 PM
Make sure you have the cax for B9021 & set it to 0.125. ID injectors have a large offset & you need to ensure this is set low to prevent an overly rich idle & decal.
I don't have efilive on this pc, but I am pretty sure those other tables can remain stock.

joecar
March 25th, 2014, 11:08 PM
Injection Timing will depend on your cam, stock as 5.7ute said.

LastCall
March 26th, 2014, 02:46 AM
Awesome, thank you both. I added the .125 for the offsets when I carried over the data from the EFI Live spreadsheet.

I will leave the injection timing as is for now.