EFI shift calculator

[jfpilla]

http://share.shutterfly.com/action/welcome?sid=8AcuWzhq1csm09Just had my trans built to a level 5. Because I can feel 2-3 and 3-4 shifts It seemed I needed to change some shift points. I'd never tried the caculator so I did. It worked great. The only change to the calculated numbers that I made was to raise the converter unlock by 2 mph. With a cam 33mph was too low. It's terrific not to have to worry about all the relationships when setting shifts. Of course I'm probably the only one who never had tried it. If I'm not I highly recommend it.:)

[Chris81]

I've never needed it on mine being a M6 until I did some tuning on a guy's auto awhile back and I was like.. WOW, this is badass.. hahaha :)

[Redline Motorsports]

Joe,

Whos tranny is it??

Howard

[kbracing96]

Where is this shift calculator your talking about?

[turboberserker]

I've never tried it either... In fact I didn't know it existed lol SO how do I find this feature?

[Chris81]

Its in the speedometer parameters, it says Transmission shift point adjustment, its by percentage.

It will adjust all the shift points for tire size/gear ratio changes.

[kbracing96]

That's what I though, but the way you guys where talking about it I though there might be something I was missing. I have done a ton of changing in my shit points by hand trying to make this small, turboed motor, move this big, heavy truck around as fast as possible.:D

[joecar]

I was going to say "Cool, new feature...":muahaha:

[jfpilla]

Joe,

Whos tranny is it??

Howard

Howard,
We have an ace tranny builder here in NC. His name is Rod Cook. You can get a level 5 for what's being paid for a level 3. Plus a 1 year warranty.
- GM 5 pinion planet assemblies front and rear,
- 4L65E reaction shell w/bearing, (extreme duty sun shell w/bearing).
- 4l65E input drum with hardened input shaft.
- HD 2-4 band and drum
- GM hardened output shaft.
- 3-4 HD clutches
- 13 vane pump kit
- hardened pump ring and spring
- HD sprag 29 element
- Full Transgo kit

Allison TranSynd trans fluid, gaskets, filters, etc.
Joe

[jfpilla]

I was going to say "Cool, new feature...":muahaha:


What, it's not a calculator:beer:

[Redline Motorsports]

Howard,
We have an ace tranny builder here in NC. His name is Rod Cook. You can get a level 5 for what's being paid for a level 3. Plus a 1 year warranty.
- GM 5 pinion planet assemblies front and rear,
- 4L65E reaction shell w/bearing, (extreme duty sun shell w/bearing).
- 4l65E input drum with hardened input shaft.
- HD 2-4 band and drum
- GM hardened output shaft.
- 3-4 HD clutches
- 13 vane pump kit
- hardened pump ring and spring
- HD sprag 29 element
- Full Transgo kit

Allison TranSynd trans fluid, gaskets, filters, etc.
Joe

Joe,

I have gotten a couple trannys from Rodney at RPM Transmissions. I believe he is in IN. Sounds like a healthy bunch of parts going in it!

Howard

[ScarabEpic22]

OK, so where is this calculator? Is it in EFILive, or is it online?

[bink]

Its in the speedometer parameters, it says Transmission shift point adjustment, its by percentage.

It will adjust all the shift points for tire size/gear ratio changes.
See above post #6

[ScarabEpic22]

Hmmm, there isnt one for my TrailBlazer, all I hav in teh Speedometer is Parameters for the speed limiter.