PDA

View Full Version : EFI shift calculator



jfpilla
April 16th, 2006, 01:05 AM
http://share.shutterfly.com/action/welcome?sid=8AcuWzhq1csm09Just had my trans built to a level 5. Because I can feel 2-3 and 3-4 shifts It seemed I needed to change some shift points. I'd never tried the caculator so I did. It worked great. The only change to the calculated numbers that I made was to raise the converter unlock by 2 mph. With a cam 33mph was too low. It's terrific not to have to worry about all the relationships when setting shifts. Of course I'm probably the only one who never had tried it. If I'm not I highly recommend it.:)

Chris81
April 17th, 2006, 11:33 AM
I've never needed it on mine being a M6 until I did some tuning on a guy's auto awhile back and I was like.. WOW, this is badass.. hahaha :)

Redline Motorsports
April 17th, 2006, 02:29 PM
Joe,

Whos tranny is it??

Howard

kbracing96
April 17th, 2006, 02:42 PM
Where is this shift calculator your talking about?

turboberserker
April 17th, 2006, 02:44 PM
I've never tried it either... In fact I didn't know it existed lol SO how do I find this feature?

Chris81
April 17th, 2006, 03:05 PM
Its in the speedometer parameters, it says Transmission shift point adjustment, its by percentage.

It will adjust all the shift points for tire size/gear ratio changes.

kbracing96
April 17th, 2006, 03:18 PM
That's what I though, but the way you guys where talking about it I though there might be something I was missing. I have done a ton of changing in my shit points by hand trying to make this small, turboed motor, move this big, heavy truck around as fast as possible.:D

joecar
April 17th, 2006, 07:02 PM
I was going to say "Cool, new feature...":muahaha:

jfpilla
April 18th, 2006, 07:08 AM
Joe,

Whos tranny is it??

Howard

Howard,
We have an ace tranny builder here in NC. His name is Rod Cook. You can get a level 5 for what's being paid for a level 3. Plus a 1 year warranty.
- GM 5 pinion planet assemblies front and rear,
- 4L65E reaction shell w/bearing, (extreme duty sun shell w/bearing).
- 4l65E input drum with hardened input shaft.
- HD 2-4 band and drum
- GM hardened output shaft.
- 3-4 HD clutches
- 13 vane pump kit
- hardened pump ring and spring
- HD sprag 29 element
- Full Transgo kit

Allison TranSynd trans fluid, gaskets, filters, etc.
Joe

jfpilla
April 18th, 2006, 07:17 AM
I was going to say "Cool, new feature...":muahaha:


What, it's not a calculator:beer:

Redline Motorsports
April 18th, 2006, 04:43 PM
Howard,
We have an ace tranny builder here in NC. His name is Rod Cook. You can get a level 5 for what's being paid for a level 3. Plus a 1 year warranty.
- GM 5 pinion planet assemblies front and rear,
- 4L65E reaction shell w/bearing, (extreme duty sun shell w/bearing).
- 4l65E input drum with hardened input shaft.
- HD 2-4 band and drum
- GM hardened output shaft.
- 3-4 HD clutches
- 13 vane pump kit
- hardened pump ring and spring
- HD sprag 29 element
- Full Transgo kit

Allison TranSynd trans fluid, gaskets, filters, etc.
Joe

Joe,

I have gotten a couple trannys from Rodney at RPM Transmissions. I believe he is in IN. Sounds like a healthy bunch of parts going in it!

Howard

ScarabEpic22
May 31st, 2006, 05:22 PM
OK, so where is this calculator? Is it in EFILive, or is it online?

bink
May 31st, 2006, 11:42 PM
Its in the speedometer parameters, it says Transmission shift point adjustment, its by percentage.

It will adjust all the shift points for tire size/gear ratio changes.
See above post #6

ScarabEpic22
June 1st, 2006, 02:32 AM
Hmmm, there isnt one for my TrailBlazer, all I hav in teh Speedometer is Parameters for the speed limiter.