PDA

View Full Version : 2012 Escalade tuning



Crowhater
April 14th, 2014, 05:18 PM
I have done some tuning on my LBZ Duramax and my C6 Corvette but never touched the Escalade. There is not much on the Internet about adjusting the Vortec L92 6.2L engine so I do not really know where to begine. I would like to wake this engine up and make it more efficient. I have installed a cold air intake on the truck, and done a complete tune up. So can you guys tell me where to begin or if I should even attemp this?

joecar
April 15th, 2014, 03:29 AM
L92 (Escalade) and LS3 (Corvette) are both GenIV, and both use E38 (maybe E67 on the Escalade)...

if you can tune the Corvette then you can tune the Escalade.

Chuck CoW
April 15th, 2014, 07:26 PM
I do lots of them. Plenty of 6.2 trucks in general.

Call me tomorrow and I'll give you the low down. 914-332-0049

Those trucks are monsters! Just be sure your front diff mount bushings are in good shape first. ;)

Chuck CoW