Cam sensor wiring pinout

[jet231]

Hi guys,

I have an 05 model ls2 with the 24x and 1x trigger wheels. Using a cam sensor in the timing case GM part no:12585545. Would anyone know what the pinout should be for this sensor? There is no ABC on it, but it has +,-,O. Guessing O is signal?? Can't seem to find a definite answer.

Thanks

[joecar]

Post a pic of the connector on the end of the sensor, and indicate which pins are + - o

my guess: + = signal (A), - = low reference/return (B), o = 12V reference (C).

[jet231]

All good thanks. It was as we thought

[joecar]

Which symbol represents the signal...?

[jet231]

+ is 12v ref, - is ground, O is signal