whypave
May 4th, 2014, 10:52 AM
I have a customer with a 2007 stock L92 and mechanically stock 6l80. I full re flashed the tcm to the corvette tune with the same OS as the escalade tune. It tap shift mode the engine and grand work fine. But in auto mode he is having problems. Here is his description.
I was hoping you could help me figure out fuel in the stock ECU tune I'm running. Is there a difference in how the tune controls fuel requirements between auto mode and tap shift mode? I can drive my jeep around in tap shift mode and it seems to do fine. However, when I get into auto mode and really romp on the throttle it tosses P0300 misfire codes. I can clear the codes and everything goes back to normal. However, I'm at the end of my rope with this Jeep. I can't figure out what's going on as this is the same issue I was having when I thought it was the fuel injectors.
The ecm tune is stock other than vats removal and removing dtcs for the second set of o2 sensors and other vehicle systems sensors he doesn't have.
The engine and trans are in a Jeep.
The transaction tune is straight from the tune file depot Web site. I can get the e38 tune but don't have it at the moment.
Any help on where I should look to troubleshoot this would be appreciated. Could the trans speedo table and ecm speedo table being out of sync cause this?
I was hoping you could help me figure out fuel in the stock ECU tune I'm running. Is there a difference in how the tune controls fuel requirements between auto mode and tap shift mode? I can drive my jeep around in tap shift mode and it seems to do fine. However, when I get into auto mode and really romp on the throttle it tosses P0300 misfire codes. I can clear the codes and everything goes back to normal. However, I'm at the end of my rope with this Jeep. I can't figure out what's going on as this is the same issue I was having when I thought it was the fuel injectors.
The ecm tune is stock other than vats removal and removing dtcs for the second set of o2 sensors and other vehicle systems sensors he doesn't have.
The engine and trans are in a Jeep.
The transaction tune is straight from the tune file depot Web site. I can get the e38 tune but don't have it at the moment.
Any help on where I should look to troubleshoot this would be appreciated. Could the trans speedo table and ecm speedo table being out of sync cause this?