Rafig & Rafpn

[ttls1]

Hi, I have been attempting to log RAFIG and RAFPN but seem to run into the same issue each time. At lower ECT it appears to be ok but as soon as it hits the 44 deg C mark it just climbs up to 5.00. There is a slight change in the rpm at this point so I guess something with the IAC is happening. I have added these figures to the table but it does not seem to make any difference as it always indicates very similar values. The car actually idles quite well but I was just wanting to dial this in. If someone could have a look at my attached logs and see if I am doing something stupid that would be great. I use the scan tool filter to only show the ECT for each break point when I update the table so hopefully I am doing that correctly. The attached tune file has had the values from log 1 updated and this tune was used for log 2.

Engine is a turbo LQ4 with 235/235 @ 114 cam

Cheers