PDA

View Full Version : F1188 Torque Converter Protection



longcummins
June 22nd, 2014, 12:41 AM
With a ATS fully built transmission how safe would I be to disable this setting in injection quantities limiters? It has the billet steel input shaft and their 5 star torque converter? I am not wanting to destroy my trans but just curious if this is something to try or just leave alone. Thanks

2007 5.9
June 22nd, 2014, 05:25 AM
Does your trans come with TCM tuning? If not, then no, if yes then yes.

longcummins
June 22nd, 2014, 06:30 AM
I have ATS copilot and the TCM was checked by ATS so it was within there specs. The copilot does increase line pressure as torque goes up according to ATS Diesel supply.

2007 5.9
June 22nd, 2014, 06:31 AM
Sounds like your good

longcummins
June 22nd, 2014, 06:32 AM
Thank you again 2007 5.9