PDA

View Full Version : 24 tooth to 58 conversion?


Praxis
July 2nd, 2014, 03:42 AM
I blew up the motor in my Trailblazer SS (aluminum 6.0, 24 tooth). It is not salvagable. I want to use just an iron 6.0 engine, and was wondering if we can reprogram the ECU to work with a potential 58 tooth wheel (opens more possibilities at salvage yards).

Thanks
picnic_george
July 2nd, 2014, 05:29 AM
Use this

http://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L460065397&Category_Code=C163



No 24x pcm that I know of will run a 58x engine
joecar
July 2nd, 2014, 06:08 AM
+1 on LPE 58x/4x->24x/1x converter.
J.Abbott
August 21st, 2014, 01:45 PM
+1 on LPE 58x/4x->24x/1x converter.

What controller is in your Trailblazer
ScarabEpic22
August 21st, 2014, 04:42 PM
It would be an E40 for an 06 TBSS.
IJ.
August 21st, 2014, 05:17 PM
Just change the reluctors and sensors... = 100% right and reliable, just done an LS1 to Gen4 this way and it runs/starts perfectly 0 issues.