PDA

View Full Version : Copy and paste where did it go?



longcummins
July 7th, 2014, 11:06 AM
I updated to the latest software update and now my copy and paste function no longer works! Isthis something in the latest update or in my PC screwing up? :mad:

GMPX
July 7th, 2014, 11:44 AM
A few more specifics please, what are you trying to copy/paste?

longcummins
July 7th, 2014, 12:00 PM
I am trying to change pilot injection quantity on quantity base and then copy and paste that to the air density 1, 2, 3 ect... hope that explains what i am trying to do. It has always worked for me when copying and pasting until yesterday when I updated the system.

longcummins
July 7th, 2014, 12:06 PM
I use to be able to copy the timing tables and paste them on the air density tables 1,2,3 ect as well and now I am no longer able to do that either. Maybe it something wrong with this new PC I don't know but i appreciate the help.

longcummins
July 8th, 2014, 09:14 AM
So was this a dumb question or what ?

30 RUM
July 9th, 2014, 05:45 AM
Hey longcummins, if you are copying the entire table I use hot-keys, Ctrl A to select all, Ctrl C to copy, then go to your table 1, Ctrl A to select all, then Ctrl V to past. Give that a shot.

Sam

longcummins
July 9th, 2014, 05:48 AM
Cool deal I will give that a try when I get home this evening.

30 RUM
July 9th, 2014, 05:53 AM
You should be good to go, I have not had any problems with any table that I have done with the above procedure.

Sam

longcummins
July 11th, 2014, 10:32 PM
Yes that doesn't work either. I get this thing that comes up and its saying something about running scripts files. Then looking into that it seems its all about GM products LMM LBZ ect.... and DSP 2 and DSP 5 so I dont understand what I may changed unknowingly. Still trying to figure this out. Thanks for the help 30RUM.

30 RUM
July 14th, 2014, 07:37 AM
If you don't mind me looking at the file, you can send it to me and I can give it a try. That would eliminate any computer problems. I just had no problems copying and pasting in an LMM & LBZ file both DSP5. Strange, my email is samk408@msn.com

longcummins
July 14th, 2014, 07:58 AM
Well I feel kinda like an idiot but I figured out what I was doing wrong, I was copying all of the 0.0 at the start of a specific line like timing for instance it would look something like this 00.0 0.03 4.96 4.96 4.96 6.01 6.01 6.13 6.21 6.25 6.39 7.55 9.73 13.01. What i was doing wrong was copying the 0.00at the start of the row and apparently you are not suppose to do that now as it wont work that away at least not for me. Either way I have it working again. Thanks 30RUM :mrgreen:

30 RUM
July 14th, 2014, 08:53 AM
No Problem, I don't know if helped you that much, Ha. BTW is that a .50 in your pic?

longcummins
July 14th, 2014, 10:03 AM
Yes it is I will have one someday setup much the same. I hope!

30 RUM
July 15th, 2014, 01:10 PM
I hear ya, it will be a tough decision for the next long rang rig I put together. I like the 50s but the.375 Wildcats are attractive as well.