PDA

View Full Version : couple of questions



SW1911
July 13th, 2014, 12:05 AM
Is anyone blending , like row or column while emmulating you ve tables ?

I saw a post about linear blending after emmulating ,but I cant seem to find the post on how and when to use it.

Iknow its imossible to hit every cell , my new project is a 2001 s10 4.3 stock engine with 36lb injectors , emmulating at idle ,my ve table almost doubles , should i save some time and raise it myself and get it closer so im not a week into it , lol

I never found a real list of what tables the rr can do ?

thanks guys

Joecar see ya soon bro:mrgreen:
Jim

joecar
July 13th, 2014, 01:44 PM
Hi Jim,

Usually the tables are close enough that blending/smoothing is minor.

If your VE table is so far off, are you sure your IFR table is correct...?

RR can do all the tables that you can see in the EFILive V7 tunetool... you just have to figure out what the feedback pid should be.

SW1911
July 14th, 2014, 06:40 AM
ifr is def correct joe , nice to hear from you again the injectors are almost double in size on the stock engine

Thanks
jim

SW1911
July 23rd, 2014, 09:50 AM
new problem , i just updated all pc,s with new software and patches and apparantly or maybe they kicked out my drivers and none I try work now , all i see is a window that says usb device not recognized will all pc,s and installing older and newer drivers and doing the flcean inbetween ARRRRRRRRRRRgh , very frustrating , finally learning the RR now its .

joecar
July 23rd, 2014, 11:28 AM
Start->All Programs->EFILive->V8->EFILive USB Manager

and try the oldest driver.

SW1911
July 23rd, 2014, 11:55 AM
says no support on on windows 8 , im stumped and maybe done ,my

maybe over , no time for this petty stuff , worked fine before , might be up for sale if i cant fix it without spending days on it

thanks for the reply joe

SW1911
July 23rd, 2014, 01:34 PM
ive done what you asked and my computer cant even see the scanner in any computer and still have the same problems above with rR usb device not recognized

SW1911
July 23rd, 2014, 10:46 PM
which old driver to install for efi , then what about THe RR

joecar
July 24th, 2014, 02:24 AM
Are you logged in as Admin...?

joecar
July 24th, 2014, 02:25 AM
Also, if your PC supports USB3 ports, go into the BIOS/boot setup menu and reconfigure them as USB2.

SW1911
July 24th, 2014, 02:54 AM
JOE i DID BOTH , MY WINDOWS 7 SEEMS TO BE WORKING ,BUT NOT THE OTHER WINDOWS 8

joecar
July 24th, 2014, 05:50 AM
Hmmmm, something's different on your Win8.