couple of questions

[SW1911]

Is anyone blending , like row or column while emmulating you ve tables ?

I saw a post about linear blending after emmulating ,but I cant seem to find the post on how and when to use it.

Iknow its imossible to hit every cell , my new project is a 2001 s10 4.3 stock engine with 36lb injectors , emmulating at idle ,my ve table almost doubles , should i save some time and raise it myself and get it closer so im not a week into it , lol

I never found a real list of what tables the rr can do ?

thanks guys

Joecar see ya soon bro:mrgreen:
Jim

[joecar]

Hi Jim,

Usually the tables are close enough that blending/smoothing is minor.

If your VE table is so far off, are you sure your IFR table is correct...?

RR can do all the tables that you can see in the EFILive V7 tunetool... you just have to figure out what the feedback pid should be.

[SW1911]

ifr is def correct joe , nice to hear from you again the injectors are almost double in size on the stock engine

Thanks
jim

[SW1911]

new problem , i just updated all pc,s with new software and patches and apparantly or maybe they kicked out my drivers and none I try work now , all i see is a window that says usb device not recognized will all pc,s and installing older and newer drivers and doing the flcean inbetween ARRRRRRRRRRRgh , very frustrating , finally learning the RR now its .

[joecar]

Start->All Programs->EFILive->V8->EFILive USB Manager

and try the oldest driver.

[SW1911]

says no support on on windows 8 , im stumped and maybe done ,my

maybe over , no time for this petty stuff , worked fine before , might be up for sale if i cant fix it without spending days on it

thanks for the reply joe

[SW1911]

ive done what you asked and my computer cant even see the scanner in any computer and still have the same problems above with rR usb device not recognized

[SW1911]

which old driver to install for efi , then what about THe RR

[joecar]

Are you logged in as Admin...?

[joecar]

Also, if your PC supports USB3 ports, go into the BIOS/boot setup menu and reconfigure them as USB2.

[SW1911]

JOE i DID BOTH , MY WINDOWS 7 SEEMS TO BE WORKING ,BUT NOT THE OTHER WINDOWS 8

[joecar]

Hmmmm, something's different on your Win8.