View Full Version : LS1 Injector Data E38 PCM?
IJ.
July 21st, 2014, 10:02 AM
Hi guys, I'm fitting a 5.7L into my Gen4 car that runs 12607218 os, I've done all the Mechanical mods needed but it would make my life a whole bunch easier if someone has the 28LB LS1 Injector Data already done!
Thanks!
statesman
July 21st, 2014, 08:54 PM
What's the part number on your injectors?
IJ.
July 21st, 2014, 09:17 PM
Haven't checked them but they're just the Stock Holden LS1 injectors.
statesman
July 21st, 2014, 10:51 PM
PM sent.
IJ.
July 21st, 2014, 11:19 PM
Just to add to the confusion this is about the only E38 os that uses -80>0<80 for the IFB....
IJ.
July 22nd, 2014, 12:08 AM
PM sent.
Thanks for the assist John :)
We'll see how it goes in a week or two!
Taz
July 22nd, 2014, 02:42 AM
Just to add to the confusion this is about the only E38 os that uses -80>0<80 for the IFB....
The 2006 E38 / E67 used that format (VAC). Changed in 2007 to DeltaMAP.
IJ.
July 22nd, 2014, 11:11 AM
The 2006 E38 / E67 used that format (VAC). Changed in 2007 to DeltaMAP.
Thanks Taz, it's also missing some of the features/tables of the later os's...
IJ.
July 23rd, 2014, 09:51 AM
Plan B
I have a near new set of shorty L98 Injectors here so just bought some extension adaptors, this totally removes the hassle of fitting the 28lb data to the E38 ;)
statesman
July 23rd, 2014, 07:02 PM
Sounds like a good plan to me... but, is there going to be a Plan C? :laugh:
IJ.
July 23rd, 2014, 07:22 PM
Sounds like a good plan to me... but, is there going to be a Plan C? :laugh:
LOL there's always a Plan C ;)
(actually ran out of the alphabet with this car)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.