I loaded the updates and now my dsp5 tunes doesnt work right.

[Meyer907]

I downloaded and installed the updates today for v7.5 and 8. I was running a single tune and decided to load up a dsp5 tune which I have used many times in the past. Now though after I load the dsp5 tunes 0 to 1/4 throttle is normal, 1/4 to 3/4 nothing it actually slows down, 3/4 to full is full tilt. When I reload the single tune it works like it is supposed to.

I have installed the stock tune then re-installed the dsp5 tune after that and i still get the same results. No error codes.

Any ideas?

[GMPX]

DSP5 config file have not been changed for many years, there should be no difference in how it works.

[THEFERMANATOR]

Just did one last week with the latest release, worked just fine for me. Sounds like you didn't configure the display units correctly when you did the tune file or something simple.

[Meyer907]

Thanks for the replies. I think I am going to just re-install the program, the tunes in question have only had tire size changes made to them and have been loaded on the truck before with no issues.