Why B0521-B0523 not editable ??!

[wesam]

I find today that B0521-B0522-B0523 are not editable in E67 but I'm almost very sure it was editable before
I tried in many OS and two different PC with two different Builds but the same problem

Any help will be appreciated

[GMPX]

What are those Wesam? I don't have any tune files on this PC.

[wesam]

Those are :
{B0521} Boost Torque Reduction By Spark Option
{B0522} Boost Torque Reduction By Fuel Option
{B0523} Boost Torque Reduction By Throttle Option

[wesam]

Did you check the problem ?

[GMPX]

Yes, sorry I forgot to respond. They have never been marked as a read only calibration but I now see what you are saying, you can select to change them but nothing happens, I've let Paul know.

[wesam]

Thanks a lot
One more thing i noticed in E67
I think there is one hidden table that decrease timing in those controler and make it not following the High/Low octan tables
even if i zeroed all IAT,ECT,Phaser,Fuel,torque management spark tables the final timing some times will be lower than Low octan table
checked but there is no Knock
so please try to check it for me

[Blacky]

I find today that B0521-B0522-B0523 are not editable in E67 but I'm almost very sure it was editable before
I tried in many OS and two different PC with two different Builds but the same problem

Any help will be appreciated

Seems like a bug in the V7 software that's been there since day 1. Turns out if the first item in the list of calibrations is tagged as "read-only", then all enumerated calibrations in the list that are modified using buttons are also set to read-only. The code for the buttons was incorrectly checking the read-only status for item[0] instead of item[row_number].

We'll get if fixed asap.

Regards
Paul

[arubenstein]

This a problem for me now too!

[joecar]

Do you have the latest software: Update-Oct-28-2014 (https://forum.efilive.com/showthread.php?24830-Update-Oct-28-2014)

[cindy@efilive]

October 28 release allows editing of these calibrations.

Cheers
Cindy