PDA

View Full Version : new and need help



Luvss350
October 11th, 2014, 08:44 PM
Hi all im new to efi live, tuning, and the forum. I have a 96 Silverado with GMs ht383e 1 inch tb spacer k&n intake system, headman longtube headders, 2.5 inch exhaust and 0411 pcm. I had it tuned by 2 people and it is like driving a geo metro. it has a max of 20 deg of timing at wot or psrt throttle. im hopping for some advice or if someone can look at the tune I attached and maby make changes or tell me what to change. the tune I attached is what I pulled out of the pcm.

Luvss350
October 11th, 2014, 08:50 PM
17595 ok I think I got it attached this time.

Luvss350
October 14th, 2014, 06:58 PM
No body? No advice or anything?

Jester
October 14th, 2014, 08:15 PM
Hi Mate, there seems to be a few calibrations that are "Out of Range". Torque Limiting, Hot PE Mode etc..Maybe set them a little lower than the EFILive soft limits, flash the tune back in and take some logs and attach them here.

Luvss350
October 15th, 2014, 10:55 AM
Jester thanks for replying! 17602I took this before I changed anything. I have not fixed the cam retard yet have not had the time but I do know that needs to be done. i have fixed all the out of range calibrations. looking for any help to go in the right direction.
thanks Joe