PDA

View Full Version : Main injection PW on scan tool



catman3126
October 21st, 2014, 04:39 AM
I can't seem to find main injection PW on the scan tool to log it? is it called something else or am I just missing it?

Dmaxink
October 21st, 2014, 02:58 PM
Not there bud, look at mm3 and pressure and then you will know if your hitting your setpoint!

GMPX
October 21st, 2014, 04:22 PM
Closest you'll get is 'GN.TINJTC1' in V7.5 or the equiv in V8 'TINJTC1'.
Unfortunately the ECM doesn't report Main uS and also doesn't seem to support DMA Type PID's (where we can define new PID's).

catman3126
October 21st, 2014, 06:24 PM
I figured that was the case I sat there and scanned through the PID's for a good 20 minutes....

catman3126
November 1st, 2014, 03:43 PM
I also can't seem to get the scan tool to transfer over to the tune to highlite the cells as they move around like older years of duramax. or is this something that doesn't work on the lml either>