high load (30mm3) at idle?

[click]

Hey guys, so I noticed on my datalogs that my truck seems to be showing a higher load at idle than other trucks I have tuned , I was wondering if anyone else has seen this, and a possible fix? Any help would be greatly appreciated

[arinkuddy]

Is this with a stock tune/engine?

[click]

No not at all

[arinkuddy]

Did you make any significant changes to the idle portions of any table? I'd try going back to a stock tune and see if it still idle around 30 mm3

[arinkuddy]

Although I don't think that it's really an issue

[Mitco39]

mm3 is not an indication of load as your main injection pulse table will vary this completely, If i wanted to I could show 80mm3 at idle for example. If you want to get right down to it and look at it that way use your pulsewidth in Us to determine fueling. Even that is manipulated by rail pressure, but it does get you close to a load value if you will.