2015 EFILive Training

[zfuller123]

Hey everyone - time for us to start planning where to hold training classes again for next year. We already have a few places we know we're going to try and have classes - but want to hear from you as you drive where we try to focus our efforts on putting a class together.

Next years training book / class will be updated to include additional information that has not been included in the materials up to this point because it either wasn't released or was new enough to the EFILive software and process that we couldn't get it included into this years training book, even though it did receive 2 separate revisions during the year - There's just been a lot of new things added and no time to incorporate them PROPERLY into the materials.

Anyhow - I'm posting this up on a couple forums and our Facebook page so I can hear WHERE people want....

Please keep in mind when placing your vote, that wherever you suggest for a class needs to have an on site dyno and a space big enough for about 20 people to sit comfortably with their computers and follow along through the class. So when you make your suggestion, please also mention a shop or a contact name of a facility that you feel would meet these requirements along with any additional contact info you have for them.

Thanks guys! Look forward to hearing from you!

-->Zach

[E.M.Adams]

If you can set up a class any where near me, I'll be there! If anybody is on the fence about going, it is worth every penny.
The bellingham class was awesome!
Let me know if I can be of any help.
I live in Longview Wa. Any shops that you know of in the Portland Or area?
Thanks

Eric

[zfuller123]

I'm not sure of any shops in that area with a dyno..... do you know any?

[kyle027]

Any chance of a class being held in the mid south? Oklahoma or texas area?

[zfuller123]

Right now looking at both a return trip to Austin Texas, and then a new possibility in Alabama. Georgia will be on the radar screen again too, as well as the possibility (still exploring) in North Carolina.... Lot's of possibilities - doing what I can in the free time to work out details with the shops in those areas to get these set up and posted for at least the first couple of months of winter.

Remember, unlike this year - next year the classes will not be as frequent. I was not able to keep up with the business and hosting a class every other weekend (in a couple of instances this year back to back weekends)... So to make sure we don't fall behind on our workload, classes in most cases will be spread to one about every 3 weeks in different parts of the country so that my mainstream business is not affected as roughly as it was this year.... had some people upset at my turn times but due to travel and giving up 2 weekdays of time for each class on top of the weekend too - well - just couldn't keep up and don't want that to happen again.

[Chisuzu]

Salt Lake City?

[zfuller123]

January Training being held in Georgia now confirmed!

See thread: here (https://forum.efilive.com/showthread.php?24938-EFILive-Diesel-Training-in-Georgia-January-2015!&p=213771&viewfull=1#post213771)

[zfuller123]

We have confirmed our second class for 2015. This will be in Wisconsin in February and will be our only February class this year. Details / discussion about this class can be found here: https://forum.efilive.com/showthread.php?24941-EFILive-training-in-Wisconsin-now-confirmed!&p=213837#post213837

[zfuller123]

We've just added a new class to the roster for this year. Details and discussions in this thread for the Salt Lake City, UT class: https://forum.efilive.com/showthread.php?25064-EFILive-training-Salt-Lake-City-March-28-29th-2015&p=214909#post214909

[zfuller123]

Two new classes added this week. 20 seats available at each.

Training in Texas and Ohio coming up!

Thread for the Ohio class information here: Ohio Training (https://forum.efilive.com/showthread.php?25101-EFILive-Diesel-Training-in-Lima-OH)

Thread for the Texas class and information here: Texas Training (https://forum.efilive.com/showthread.php?25100-EFILive-training-in-Liberty-Hill-TX-at-Hamilton-Cams)

[zfuller123]

Ok just an update on the classes coming up while there's still time to register:

Ohio - March 7-8th at UNOH in Lima, OH (http://www.starlitediesel.com/EFILive-Diesel-Training-in-Lima-OH-March-7-8th-CLASS-OH15.htm)
Utah - March 28-29th at Industrial Injection in Salt Lake City, UT (http://www.starlitediesel.com/EFILive-Diesel-Training-in-SLC-UT-March-28-29th-CLASS-UT15.htm)

**NEW CLASS - JUST ADDED**
Colorado - May 9-10th at ATS in Arvada, CO (http://www.starlitediesel.com/EFILive-Diesel-Training-in-Arvada-CO-May-9-10th-CLASS-CO15.htm)(just outside of Denver)

To read up or follow up on any of these classes, just click the links to be taken to our site and sign up!

As of today, there are only 5 spots left for Ohio class, and 10 left for Industrial class. Don't miss your chance!

[zfuller123]

The class in Liberty Hill Texas at Hamilton Cams has been cancelled due to Hamilton moving their research facility (sold the building to move to a new building). We will not be able to hold class there in April, but will be looking to hold a class somewhere towards central Texas this fall. We tried to make it work out but with the Schedule they have to keep to get things moved and relocating the dyno, etc - the class is not able to happen at this time. We look forward to returning to Hamilton's place or somewhere else in the general area this fall!

[Coletrain45]

anything planned for TN? i drove to ohio last year and would like to attend again for the updates and more information