6.7 flash

[Scarface]

I have a customer with a fully deleted 07 6.7 manual trans truck. the previous owner did not have the smarty for that truck anymore. would it be safe for me to flash a good known stock file in it. I tried reading his file off his truck and I get error codes.

[cindy@efilive]

Even if the owner still had the smarty chances are you'd still have the same issues - their stock file isn't actually stock.

A good known stock file needs to be flashed into the ECM.

Cheers
Cindy

[Scarface]

ok thanks cindy I will flash the good file I have for that yr of truck and see how it runs with it.

[Scarface]

finally got the customer coming in or the stock file for me to flash in it. I got a good stock file from a tunner that is clean. do I just do a vin lic on it and a full flash with the good file to get the truck clean. since I could not read the file cause of the smarty that is on it

[cindy@efilive]

Yes, flash in the good tune. During the flash the software will ask you to go through the licensing step if the ECM hasn't been licensed already.

Cheer
Cindy

[Scarface]

ok thanks cindy. I am just trying to get a good clean file on his truck then upgrade him to efi. the csp5 is avaible now to the public right for the 6.7s

[cindy@efilive]

October 28 software contains CSP for 6.7. The download is in our forum, given it's a public pre release. (Ie. auto update does not work and links not on our website because it's not deemed public release.)

Cheers
Cindy

[Scarface]

ok thanks:mrgreen: