PDA

View Full Version : Need help re installing tunes



deadams
November 23rd, 2014, 01:13 PM
Hi there I've had efilive since 2011 in my 05 lly duramax tuned by Idaho rob with the dsp5 switch.just recently the tune just stopped working so i flashed the truck back to stock and want to reinstall the tunes.the problems ran into is that I don't have the lap top that I originally tuned the truck with. I have another laptop with v7.5 and 8.2 updated firmware and boot blocker but can't figure out how to transfer the tunes from the Autocal to the truck as I did it originally in 2011 and haven't really had to use it again until now any help would be nice thanks allot

cindy@efilive
November 23rd, 2014, 01:30 PM
Connect the AutoCal to the vehicle and using the AutoCal navigate to the file you wish to flash - it's exactly the same process you used to flash to stock, except your selecting your modified tune.

You may also find the AutoCal for End Users guide useful. It can be found here http://content.efilive.com/documents/EFILive%20AutoCal%20Info%20For%20End%20Users.pdf

Cheers
Cindy