PDA

View Full Version : DSP5 Cigarette lighter mount LBZ



Freshness247
December 15th, 2014, 04:41 AM
Hi Guys, newbie here...

Uploaded Autocal tunes, routed DSP5 wire through firewall and connected to the ECM plug.

Then i pulled off the center console panel to remove cig lighter and see there is very limited room to run the switch from under the dash to the cig lighter position.

I think my only 2 options are:

1. Remove the pins from connector and re-route the wire with the switch installed.
(Can I remove the pins from connector without damaging?)
2. Remove the center console panels to some extent to route the whole switch through.

I'm just looking for some feedback, pointers, help, someone who has maybe ran into a similar problem.

Thanks, Johnny V

2007 GMC Sierra 2500HD LBZ ECSB OBS
AEM Intake, MBRP 3" downpipe, MBRP 4" duals, Prosport EGT & Boost gauge in overhead console, EFI Autocal DSP5 - Stock, Heavy Tow, Light Tow, Sport Econ, Performance