View Full Version : EFI live lb7 tuning help PLZ!
mitchellmcevoy
December 20th, 2014, 02:56 PM
New to this EFI Live game have one main question. when you want to tune an individual dsp5 switch position, lets say #1, do you just turn your switch to the #1 setting and reflash your ecm or do you have to choose the #1 position in the Flash/Scan V2 program. I am using the hardwired switch setting
The Neens
December 28th, 2014, 04:48 AM
When you flash the ECM, it does not matter what position the switch is in...
twalterdmax
December 30th, 2014, 08:48 AM
Congrats on the upgrade to EFILive. I also just bought last month and I'm learning the ropes. There is a good tutorial on the process. It should be installed in your v7.5/doc/tutorials/DSP Upgrade Tutorial - LB7-LLY.pdf.
Basically you will need to open your stock tune and upgrade the OS to DSP5.
Then save the tune and close.
Then re-open the tune. When it opens it will now look different. There will be a new set of EFILive specific items you can change. These show the tables that can be modified for each of the 5 tunes.
Of the 5 tunes one is your basic tune and the next 4 have modifications in this section. You can modify most of the performance tables and the main tables (fuel sensor, etc) are only in the main tune.
Good luck.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.