PDA

View Full Version : lml delete



akaponch
January 3rd, 2015, 08:11 PM
Anyone willing to share what combo of switches you used to delete a 2014 lml with

Operating system 12645752
Engine Operation 12659946
Engine Diagnostics 12659952
Engine 12660027
Fuel System 12650027
System 12654730
Speedometer 12650048

I have tried multiple combos and for some reason have not had any luck. By the time I get to the point where CEL is off I will get the message on dash that says "Exhaust Fluid Empty Please Refill 400 miles until 65 mph". So far from the different trucks I have tried, the one with Engine Operation 12659946, I cant turn off that Message.

Temporally, what I did is swapped Engine Operation with 12656508 and all is working wonderful. So far cruise and remote start are working. All deleted. Has anyone dealt with this before?

bmc1025
January 5th, 2015, 05:48 PM
Are you having any other issues using the 508 engine segment?

akaponch
January 5th, 2015, 05:58 PM
No, there was no issues. It runs great.

I had help from a member on the forum and saw my mistake. I didn't turn off a switch. Tomorrow i will flash the correct one.

bmc1025
January 5th, 2015, 06:00 PM
Ah thanks for the update !

Padendiesel
March 23rd, 2015, 04:11 AM
Im having this same scenario with a 12645750 os

LMMPerrona
April 3rd, 2015, 11:43 AM
Did you figure out the problem?

Padendiesel
April 3rd, 2015, 11:54 AM
Nope

LMMPerrona
April 4th, 2015, 06:43 AM
Nope

I pm'ed you.

jgooch1548
April 5th, 2016, 09:36 AM
AkaPonch you mind PMing me, Got a couple Questions if you have time.

jjones@macljon.com
May 24th, 2017, 11:28 PM
i cant get the poor quality message to go away. DPF and SRC are turned off and all the DTCs disabled. this is on a 2014 lml. i did a 2011 lml a few weeks ago and had no problems. any ideas?

Whozzat
June 23rd, 2017, 08:10 AM
2012 lml can't get rid of p2033 dtc after delete. can anyone help?

jjones@macljon.com
June 23rd, 2017, 09:20 AM
Go into the DTC list and disable it. That's all you should have to do.

Whozzat
June 25th, 2017, 01:50 PM
Where is the dtc list in an LML tune?

jjones@macljon.com
June 26th, 2017, 11:50 PM
go into engine diagnostics. then click on diagnoigstic DTCs. then DTC activation table.

jjones@macljon.com
June 26th, 2017, 11:51 PM
you have to be in v7.5 tune. BTW

Whozzat
June 27th, 2017, 01:05 AM
I don't get a DTC table in an LML tune. It's there in an LMM tune but not an LML. In vehicle options I've turned everything off except the air heater and still get the P2033 code and cel

jjones@macljon.com
June 30th, 2017, 05:10 AM
Thats odd. Are you sure you have the right tune? I ran into something similar. I flashed a 2012 with a 2011 tune. It threw random codes