Limiter Issues, Help me out!!

[Creek View Diesel]

Customer came in and I put this tune on his truck and its not fueling the mm3 amount that we were looking for. What is holding this truck back? This has been the only Cummins I have tuned to put up a fight. Truck is an 2009 with a G56 trans and a South Bend Double disk

[anarchydiesel]

You still have several pulse and commanded mm3 limiters in play. Look at all the limiting tables under the internal flash tab.

[Mitco39]

Pay attention to the axis of these limiters as well.

[Creek View Diesel]

You still have several pulse and commanded mm3 limiters in play. Look at all the limiting tables under the internal flash tab. Would you give this one a look and see if I fixed them all or if I left one, I believe I got them all. Thanks again for the help!
17928

[700kenny]

Would you give this one a look and see if I fixed them all or if I left one, I believe I got them all. Thanks again for the help!
17924

I could not view tune.

[Creek View Diesel]

Try it now, if it still wont work I could just email it to you.
17929

[Creek View Diesel]

I could not view tune.

I now see the problem you were having. Try this one lol
17927

[700kenny]

look at d2012

[Creek View Diesel]

look at d2012

Thanks, Hopefully this will fix my issues and let this truck run like it should