PDA

View Full Version : Limiter Issues, Help me out!!



Creek View Diesel
January 8th, 2015, 06:28 AM
Customer came in and I put this tune on his truck and its not fueling the mm3 amount that we were looking for. What is holding this truck back? This has been the only Cummins I have tuned to put up a fight. Truck is an 2009 with a G56 trans and a South Bend Double disk

anarchydiesel
January 8th, 2015, 07:17 AM
You still have several pulse and commanded mm3 limiters in play. Look at all the limiting tables under the internal flash tab.

Mitco39
January 8th, 2015, 03:08 PM
Pay attention to the axis of these limiters as well.

Creek View Diesel
January 13th, 2015, 06:39 AM
You still have several pulse and commanded mm3 limiters in play. Look at all the limiting tables under the internal flash tab. Would you give this one a look and see if I fixed them all or if I left one, I believe I got them all. Thanks again for the help!
17928

700kenny
January 13th, 2015, 12:49 PM
Would you give this one a look and see if I fixed them all or if I left one, I believe I got them all. Thanks again for the help!
17924

I could not view tune.

Creek View Diesel
January 13th, 2015, 12:53 PM
Try it now, if it still wont work I could just email it to you.
17929

Creek View Diesel
January 13th, 2015, 12:59 PM
I could not view tune.

I now see the problem you were having. Try this one lol
17927

700kenny
January 14th, 2015, 02:14 PM
look at d2012

Creek View Diesel
January 14th, 2015, 02:46 PM
look at d2012

Thanks, Hopefully this will fix my issues and let this truck run like it should