dsp feels dead

[crash85]

Ok ive got the tunes in and the single tunes run great. when I install the dsp tune it feels like the truck don't want to boost. sometimes ya have your foot in the floor and it just lags and it will pick up for a sec and fall right back on it face. what could be causing this ?

[crash85]

Any one have an idea

[garrettg.bpd]

Posting your tune and maybe some logs would speed up the help proces.

[crash85]

Ok but what I don't understand is each tune as a single runs good but when I copy it to dsp it won't run let me get the logs and I'll post them up

[crash85]

ok I got it figured out it was in the vanes I opened them to get rumble idle and went a lil to far but still don't understand why it was doing what it did .

[Mitco39]

Without posting any tunes, logs or real info no one will be able to tell you anything.

http://blog.fractureme.com/wp-content/uploads/2014/06/d62a63bfb2d981ef79985a79a973372e7a24a0114b8e53e1e0 b6ea22d98c9167.jpg

[crash85]

I got it figured out I was building my own dsp and I make a single tune first then install it in the truck to get it right. then ill convert it over to the dsp tune but I messed up in my boost table from copy and paste from the single to the dsp I copied the wrong table and pasted it in the dsp so it threw it way off