code 1400

[crash85]

Not sure if this is in the right place. when I use the tunning tool and go to close it out I keep getting and error code ( system error code : 1400 invalid window handle) what does that mean?

[joecar]

Which build version of V7 software (go Help->About)...?

Can you post a screenshot...?

Or when you see the popup, go Ctrl-C within the popup, and then immediately paste into a reply to this thread.

[crash85]

18185

hope the screen shot worked

[crash85]

its v7.5.7 (build276)
---------------------------
EFILive Tune - Digital tools for onboard vehicle electronics
---------------------------
System Error. Code: 1400.

Invalid window handle.
---------------------------
OK
---------------------------

[joecar]

Do you want to try and see if it happens with build 280...?

March-2015-EFILive-Release-Candidate-1 (https://forum.efilive.com/showthread.php?25314-March-2015-EFILive-Release-Candidate-1)

[crash85]

ok its updated now as soon as I get the motor back in iam gonna try it . also my firmware wont update to new release iam on the 2.07.77 feb 05 2015. I refresh my firmware in v8 and it says it ok up to date?

[Blacky]

ok its updated now as soon as I get the motor back in iam gonna try it . also my firmware wont update to new release iam on the 2.07.77 feb 05 2015. I refresh my firmware in v8 and it says it ok up to date?

If you haven't already, you must install the latest V8 software because the V8 software contains the updated firmware. The firmware should be updated to V2.07.81 after installing the V8 software and clicking on the [Check Firmware] button.

Regards
Paul

[crash85]

ok I installed the new updates for the v8 and v7.5 and go to check my firmware and it still the same 2.07.77 feb 05 15. where am I messing up? I download the new update and then hit run . it then went and did its thing and said finish and then I check and its still the same

[joecar]

To update the firmware do this: start V8 S&T and click Check Firmware, and look for red, click button to program new firmware.

Then when done it will show you if the BBx config needs updating also, look for red and click button to program config.

[crash85]

18208

[crash85]

This is what comes up when I hit check firmware

[Taz]

The "code 1400" error seems to be an issue with closing the TuneTool in Windows.

See this thread ...

https://forum.efilive.com/showthread.php?23483-Update-Nov-21-2013&p=203910&viewfull=1#post203910

Joecar - you commented in Post #68

In post #72 I explained my perception of the issue.

The software only does this (code 1400 error) on 2 out of 5 Notebooks that I use for tuning. I have never been able to sort it out. It never happens if I use "Alt + F4" to close the TuneTool.

[crash85]

Is it messing with anything but It used to not do it till I updated it in the end of Feb that's when it started this

[Blacky]

It seems like you have not installed the latest software versions from here:
https://forum.efilive.com/showthread.php?25314-March-2015-EFILive-Release-Candidate-1

There are two links. One for V7.5 and one for V8. You must download both of them and install both of them.
Once the V8 software is installed. Run the EFILive V8 software.
First, check that the [About] button shows [About V8.2.2.274] The last number is the critical number it must be 274 or higher.
Next, click on the [Check Firmware] button to update the firmware to V2.07.81. The last part of the firmware must be 81 or higher.
When you select the Help->About option in the V7.5 software you should see version: V7.5.7 build 280. The build number must be 280 or higher.

Regards
Paul

[crash85]

Ok I got it now thanks for the help