PDA

View Full Version : 2011 5500 problems



Bad-Duvall
April 8th, 2015, 04:15 AM
Error code: ERR_RESPONSE/5

Response $31: "Request Out of Range"

this is what im getting when trying the change the vin and clear the DTC's

Whats werid is that i can change the vin with out clearing codes BUT it will change back to the old vin after some time... 10 min or so.

2007 5.9
April 8th, 2015, 05:39 AM
Vin is irrelevant on CMC/CME/CMD controllers

Mitco39
April 8th, 2015, 06:29 AM
If this is the guy I was talking to yesterday, hes trying to swap a CMD computer in and although the change vin works for a bit it will swap back when its powered down. It seems like the change is only getting stored in the ram and not into the non volatile memory.