PDA

View Full Version : 2009 6.7 3500 "dpf full message" on overhead



ogden08
April 14th, 2015, 06:50 AM
I have a 2009 6.7 3500 that I just tuned with efi. I just used stock tune changed nothing other than setting up for delete. truck is now setting dpf full message on overhead. Just wondering if I missed something easy. Thanks


18246

SASDakota
April 14th, 2015, 08:13 AM
Update your V7 EFI live from .262 to the latest and re-check your options and DTCs. There is a lot left behind.

ogden08
April 14th, 2015, 10:23 AM
Will do thank you for the help still new at this

bondurch
May 18th, 2016, 11:29 AM
:book: thanks

HOLLIN
June 6th, 2016, 12:35 PM
update your v7 efi live from .262 to the latest and re-check your options and dtcs. There is a lot left behind.

i have a 2007 c&c 3500. Did the had parts(exhuast,egr) then file mod/ flashed and all seemed fine. A couple weeks later the "dpf ful" message in the overhead came up. Tried to scan the ecm with conventional scanner and no response??? IM RUNNING V8 WITH LATEST UPDATES.

Obamasuxballs
June 6th, 2016, 04:22 PM
I'm new to this, 07.5 cab chassis 3500 4x4 I just had it deleted and now I keep getting the p1011 code low fuel pressure, truck loses power when light comes on.. Not sure if it's the tuning or it really is a fuel issue, I've been told these cab chassis trucks are a little different on the tuning than regular 6.7 trucks, not sure just what I've been told.. I had a Really Good Shop do it for it but they normally only do Duramax Trucks and have done several dodges with no issues until mine of course! I ordered a fuel rail plug today and changing the fuel filter in the morn.. I didn't mention the truck has 293k flawless miles never been to the dealer one time as soon as the dpf said it was full and see dealer I took it to him the same day.. Any help would be great. Thanks.