PDA

View Full Version : No start 2013' dodge code$0280



Kmg2012
April 23rd, 2015, 02:13 PM
Long story short wife pulled up at the house turned truck off 10 min later went to start and nothing happened. Turn key on all lights come on but nothing when u turn to start. DTC code is $0280. Tried to reflash the tune and auto cal gives error$0549. Truck is a 2013 dodge and has been tuned for about 2 months with no issues. Any help is greatly appreciated.

2007 5.9
April 23rd, 2015, 02:27 PM
Have you contacted your tuner?

Kmg2012
April 23rd, 2015, 02:28 PM
Hoping to get ahold of him tomorrow if no one can help me tonight

GMPX
April 23rd, 2015, 05:15 PM
Long story short wife pulled up at the house turned truck off 10 min later went to start and nothing happened. Turn key on all lights come on but nothing when u turn to start. DTC code is $0280. Tried to reflash the tune and auto cal gives error$0549. Truck is a 2013 dodge and has been tuned for about 2 months with no issues. Any help is greatly appreciated.

You mean P0280?
P0280 Injector Solenoid Driver Cylinder #7 Current Too High

EFILive error $0549 on a Dodge usually results from not being able to communicate with the ECM at all. Unfortunately I think something has failed on the truck.

Mitco39
April 24th, 2015, 12:52 AM
We had this same issue, are you using a bullydog to monitor the truck? We have had bullydogs shut down the canbus on the trucks, the only way to get it back (atleast from what we found) is disconnect the bullydog unplug both batts and let it sit for 5 mins then reconnect. Something in their units can cause the whole system to shut down on the truck and not reboot even after you unplug it.

The fact that your are getting $0280 would have me believe this is what is happening.