efiexpress
June 30th, 2015, 03:37 AM
Hi,
first time poster, I run a dyno tuning shop. I have limited experience with the newer direct injection chevy stuff but have done plenty of tuning on the older motors. Looking into the calibration the only thing I can find related to the e-throttle response is the torque limiting/ max throttle table, which is already set from stock at 100% in all cells.
suggestions on where to improve here?
I've attached the current tune.
Thanks.
18585
first time poster, I run a dyno tuning shop. I have limited experience with the newer direct injection chevy stuff but have done plenty of tuning on the older motors. Looking into the calibration the only thing I can find related to the e-throttle response is the torque limiting/ max throttle table, which is already set from stock at 100% in all cells.
suggestions on where to improve here?
I've attached the current tune.
Thanks.
18585