PDA

View Full Version : High Idle


DarkDiesel
July 16th, 2015, 12:56 PM
Probably have this asked a lot, what I found in searches wasn't much help

Any one have a Manual High Idle base file for an 07?
OS 11450202
Calibration 45325753AH

Thanks
ATPCummins
July 17th, 2015, 02:19 AM
I do have a 202 OS with high idle enabled for a manual somewhere, but it is not where I thought it was. In the mean time here is a 602 OS that can be used.

18634
DarkDiesel
July 17th, 2015, 07:04 PM
Awesome I will get to work haha Thanks!
DarkDiesel
July 18th, 2015, 01:07 PM
Sent an email, Mike
ATPCummins
July 20th, 2015, 02:42 AM
Sent an email, Mike

You should have what you are looking for now!
DarkDiesel
July 21st, 2015, 12:40 PM
Perfect Thanks!
catman3126
September 21st, 2015, 09:48 AM
Subd
Ghostman
December 22nd, 2015, 04:07 AM
I have a 2006 auto, will this file work if my OS is 405?
Move'n Up
December 22nd, 2015, 04:14 AM
Pretty sure that High Idle is handled by the Totally Intergraded Power Module (TIPM), at least in the 06 & 07 model years, which is not accessible via EFI Live.
Ghostman
December 22nd, 2015, 04:15 AM
Ok so then I still need to have it flash by chrysler I guess?
ATPCummins
December 22nd, 2015, 04:32 AM
The attached file has the manual high idle feature enabled and will work without messing with the TIPM. I should replace your 405 OS without any issues.
Ghostman
December 22nd, 2015, 05:00 AM
The attached file has the manual high idle feature enabled and will work without messing with the TIPM. I should replace your 405 OS without any issues.

Ok thx very much.

I really appreciate the help. Just getting started with my V2 from Anarchy tuning myself. Have read almost every thread on here.

So how would I go about pasting my tune onto this file? And I assume just enter my VIN into it to make sure it matches and I should be able to flash the truck?
ATPCummins
December 22nd, 2015, 05:20 AM
Yes, you will need to be sure that your VIN is correct as well as the anti-theft settings.

You can copy and paste your tables over, or create a script of your current tune and run that over the new OS.
Ghostman
December 22nd, 2015, 10:47 AM
Ok I opened up the high idle file and I noticed it does say manual for transmission and mine is an automatic. So this probably won't work then...
ATPCummins
December 22nd, 2015, 11:06 AM
Auto file attached: 19100
Ghostman
December 22nd, 2015, 11:15 AM
Auto file attached: 19100

Well thanks very much sir!!
Ghostman
December 22nd, 2015, 03:24 PM
So I couldn't figure out the scripting yet so I just copied the tables over, put in my vin, and flashed the truck and it works!
ATPCummins
December 23rd, 2015, 03:28 AM
Glad to hear that it worked for you!
TuneCrazy53
December 26th, 2015, 04:21 PM
Awesome! I've been looking for this for a while! Works Great!
superwagon
December 27th, 2015, 08:26 PM
I decided to try the auto high idle file as well. Converted to csp5 and ran a script. Worked perfect! Thank you!
TuneCrazy53
December 28th, 2015, 10:17 AM
How do you run a script and transfer everything over? I just copy and pasted and that took a while..! Thanks
ATPCummins
December 28th, 2015, 11:56 AM
Open your stock tune, then open your custom tune as a comparison. Click on edit, and then create script. Save the script with whatever name makes sense to you. Open the new stock base tune you want to use, and click on edit, then run script. Select the script that you just created and run. Once the script is done running save it with a new name. That is it.

Two important things to remember when scripting: If you created the script with metric units, it must be run with the tune set to metric (or created and run with imperial). When creating a script you must use the same operating system as a comparison. Meaning that if you are creating a script for a CSP5 tune, it must be compared to a stock tune upgraded to the CSP5 OS.