Flash scan V2 not live monitoring E67, what am I doing wrong? Please help!

[Envious]

Hey guys, this is my first post on these forums. I need some help with Scan tool on a E67 ZR1 vette. Plugged into a laptop it tells me it has successfully connected and tells me info about the car, but when I enable the PID's I would like to monitor, I get nothing. Does anyone know what this could be? Thanks in advance.

[b4pjs]

Have you actually started scanning once your pids have been selected?

[joecar]

Press the red record button (bottom center of scantool window).

[Envious]

I have clicked the Red record button and it says that it is recording at the bottom of the screen but all of the graphs and gauges show nothing.

[joecar]

Post screenshots of what scantool shows.

[Envious]

1873318734

[joecar]

In scantool, go Edit->Properties->Connection and set Preferred Cable Type to EFILive FlashScan V2.5 HAPI, and click Ok.

[joecar]

Also, it is easier to read an actual screenshot (i.e. taken by doing Shift-PrtScrn)...

I use Greenshot to annotate the image, see http://getgreenshot.org

you don't have many pids selected, select a few more (SAE.RPM, SAE.MAP, SAE.IAT, SAE.ECT, SAE.MAF)... and at least the pids needed for those gauges your pic shows.

[Envious]

Thanks so much for the help. My PID's were all screwed up.Everything is working great now. I have one more question though, one thing I want to monitor that I don't have yet, that is what PID should I use to monitor Supercharger boost?

[joecar]

Try: SAE.MAP, GM.BOOSTxxx, GM.MAPBOOSTxxx.

When you find which one works, we may have to make a calc pid out if it (to convert from absolute pressure to boost pressure relative to BARO).

[b4pjs]

I created a calculated pid using map - baro. Will dig it out when back at computer.

[Envious]

Will try that tonight and reply with what worked for me. Thank you.