View Full Version : tbss ls7 maf tuning help
05chevy
August 30th, 2015, 06:40 AM
06 tbss. 4" intake with ls7 Maf. Need help tuning it. Also need help with electric fans. Will pay someone for there time. Thank you
joecar
August 30th, 2015, 08:20 AM
You want to correct the MAF table for the LS7 MAF and 4" plumbing...?
Do you have a wideband (if so, which one)...?
Can you correct the MAF table using the Calc.VET (only use the MAFcorrection portion) or AutoMAF procedures...?
05chevy
August 30th, 2015, 08:24 AM
Yes correct the maf table.
Do not have wide band yet
Have not tried calc.vet
joecar
August 30th, 2015, 08:55 AM
Ok, without wideband you can only correct a very limited range of the MAF table(s) using LTFT's...
you would log LONGFT1/2 and FUELSYSA/B;
you would create a transient filter (to exclude throttle transitions) which also excludes non Closed Loop;
you would create a map of LONGFT1 or 2 or average to match your MAF table, apply the transient filter, and apply the map to the MAF table;
since you have no wideband you would have to eyeball extrapolate the MAF curve to the higher frequencies...
You REALLY do need a wideband for correcting your MAF table(s).
Post a log of MAFFREQ2, MAF, LONGFT1/2, FUELSYSA/B, ETCTP, RPM, ECT, IAT, MAP...
Post your tune file.
joecar
August 30th, 2015, 08:56 AM
Which PCM/ECM do you have...?
05chevy
August 30th, 2015, 09:15 AM
18771
18772
here is the stock files
Taz
August 30th, 2015, 11:27 AM
Patched your E-Fans ...
PWM break points:
40% - Fan1 OFF
44% - Fan 1 ON
85% - Fan 2 OFF
90% - Fan 2 ON
... need help with electric fans. Will pay someone for there time ...
A modest donation to any recognized charity would help someone else.
joecar
August 30th, 2015, 11:53 AM
Taz, thanks.
joecar
August 30th, 2015, 11:53 AM
18771
18772
here is the stock filesAlso post a log file showing LTFT's.
05chevy
August 30th, 2015, 12:57 PM
18778
here is a log with the intake. idle to 3000rpm. I pasted the MAF low and high frequency conversion tables from a 08 LS7 and it will idle. but still hiccups every now and then. i also have a IAT sensor break out harness on this infront of the MAF. thanks
joecar
August 30th, 2015, 04:00 PM
Sorry, I forgot to say previously, I also need MAFFREQ or MAFFREQ2 in the log.
05chevy
August 31st, 2015, 02:38 AM
Sorry, I forgot to say previously, I also need MAFFREQ or MAFFREQ2 in the log.
I'll have to get another log tonight
05chevy
August 31st, 2015, 10:10 AM
18785
18786
Here is the tune i flashed to get it running.
Here is the log with MAFRQ
joecar
August 31st, 2015, 10:44 AM
18785
18786
Here is the tune i flashed to get it running.
Here is the log with MAFRQOk, thanks, I'll look at these when I get home tonite... ping this thread again to remind me (I have about 8 tunes in my queue).
05chevy
August 31st, 2015, 10:46 AM
Ok thanks
joecar
August 31st, 2015, 10:52 AM
I mean ping it again in about 2 hours if you can, thanks :cheers:
05chevy
August 31st, 2015, 01:28 PM
I mean ping it again in about 2 hours if you can, thanks :cheers:
Bump
joecar
August 31st, 2015, 04:27 PM
Why is your ECT so cold...?
05chevy
August 31st, 2015, 10:50 PM
That's my fualt. Didn't get the car to operating temp.
joecar
September 1st, 2015, 03:36 AM
I'm working on your MAF table, but please do get another log.
05chevy
September 6th, 2015, 08:44 AM
18803
Here is a log at O.T. I also took it for a drive on this log. 1-2 shift is HARSH. Sorry it took so long. I have been really busy. Thanks
joecar
September 6th, 2015, 02:14 PM
18803
Here is a log at O.T. I also took it for a drive on this log. 1-2 shift is HARSH. Sorry it took so long. I have been really busy. ThanksIt this the tune file the log was taken from: TBSS stock ECM tune ls7 maf.ctz (https://forum.efilive.com/attachment.php?attachmentid=18785&d=1441058950)
joecar
September 6th, 2015, 02:16 PM
18803
Here is a log at O.T. I also took it for a drive on this log. 1-2 shift is HARSH. Sorry it took so long. I have been really busy. ThanksI really need MAFFREQ2 to be included in the log
( on the PIDs tab, when you select this pid, save the pid selection (click the Save Pid Selection button) ).
05chevy
September 6th, 2015, 02:27 PM
It this the tune file the log was taken from: TBSS stock ECM tune ls7 maf.ctz (https://forum.efilive.com/attachment.php?attachmentid=18785&d=1441058950)
Yea and I thought I had it in there. If you have a pid that has the MAFFREQ2 in it please send it to me. Because the log pids I have I can not find it. Thanks
I really need MAFFREQ2 to be included in the log.
It this the tune file the log was taken from: TBSS stock ECM tune ls7 maf.ctz (https://forum.efilive.com/attachment.php?attachmentid=18785&d=1441058950)
joecar
September 6th, 2015, 02:46 PM
Ok, here is the pid list to use, copy to Documents\EFILive\V7.5\PIDs.
Also, try flash the attached .ctz and take a new log from this.
05chevy
September 6th, 2015, 02:48 PM
Ok will do first thing in the morning. Thank you
joecar
September 6th, 2015, 02:49 PM
Also, something wrong with your LC1 in the log...
update your V7/V8 software (and V2 firmware) from here: Aug-27-2015-EFILive-Public-Pre-Release (https://forum.efilive.com/showthread.php?25899-Aug-27-2015-EFILive-Public-Pre-Release)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.