Issues with V7.5 scantool need help with maps after reinstall.

[sac811]

I previously had everything set up in my V7.5 scantool and working perfectly for my calc.maft tuning.

Except the filter feature stopping actually filtering.

After a while I just decided to Uninstall it, then reinstall it.

Now I can't seem to find calc.Wo2ben and other related things that were allowing me to tune with. Even after loading the pid file I previously had used I still can't find it. And also even though it wouldn't have given me the proper info without the calc files, when I load a map to A,B etc the map won't even show up with 0.000 like it used to, it shows nothing at all.

I must be missing something here.

Any help would be appreciated.

Thanks

Jeremy

[joecar]

Hi Jeremy,

Please post some screenshots (use SHIFT-PrtSCr and save to .png file, and post here)...

do you still have the calc_pids.txt file containing the definition of the CALC.WO2BEN pid...?

Sounds like you pid list and map definitions got lost, I'll post mine here shortly...

[sac811]

Hi Jeremy,

Please post some screenshots (use SHIFT-PrtSCr and save to .png file, and post here)...

do you still have the calc_pids.txt file containing the definition of the CALC.WO2BEN pid...?

Sounds like you pid list and map definitions got lost, I'll post mine here shortly...

Ok, yeah post those up for me please. I won't be able to take pictures until much later, so if I can have what I need ready to go, hopefully I can finish it up tonight or tomorrow morning.

Thanks

Jeremy

[joecar]

Ok, here's some Calc.VET/Calc.MAFT maps, extract from zip into this folder: \Documents\EFILive\V7.5\Maps


For Calc.VET you need:
- B0101=CALC.VET.map
- B5001=CALC.SELBEN.map

For Calc.MAFT you need:
- B0101=CALC.SELBEN.map
- B5001=CALC.MAFT.map



Edit: updated Maps.zip

[joecar]

Here's the calc_pids.txt file: calc_pids.txt (https://forum.efilive.com/attachment.php?attachmentid=18747&d=1440722466)

goes into this folder: \Documents\EFILive\V7.5\User Configuration

[joecar]

Here's the pid file: Calc-VET-0000.pid (https://forum.efilive.com/attachment.php?attachmentid=18830&d=1442111508)

goes into this folder: \Documents\EFILive\V7.5\PIDs


then start v7 scantool, goto PIDs tab, open this .pids file.

[sac811]

Ok, got everything going from the file help you gave me.

Only problem is, when I activate the wo2BEN it is not activating MAFT or VET like it normally used to.

I went in to the text file and deleted anything related to ltft and stft, as I am in open loop with only WBO2 sensor doing my tuning.

I dont remember what I used to have different here.

I will post the text file below:

18861

Did I adjust it correctly for calc.maft with only wbo2 being used in open loop?

[sac811]

Ok now I got the VE multipliers map working, but the MAF BEN corrected table of grams/s is not working for some reason.

[sac811]

Ok, I appear to have gotten it all fixed up.

Thanks for the help