O1Z06
September 29th, 2015, 02:08 AM
Hi all, I need some help here. I am having some problems with not ready SRT for Evap, SAIR and O2 sensor 2.
I need to get it inspected to get my registration for my specialty licence plate. I live in Texas and in the past the inspection was separate but legislature now combined them and called it the "Texas two step".:Eyecrazy:
I have tried everything suggested by Joecar in this thread but systems are still not ready https://forum.efilive.com/showthread.php?5321-Evaporative-purge-system-not-ready
The car is heavily modified and is a show/track car and these are not connected: evap purge solenoid (one on the engine), AIR pump and O2 sensor 2.
Do the sensors need to be plugged in for the test to try to run. In other words the circuit tests does not have a DTC but the performance of the system test is set to not reported thereby thinking it is ok? In my reading it looked like everything could be removed and set to not reported with MIL on and as soon as key on everything would report ready.
I'm running a roadrunner 512k 0411 COS5 open loop tune and specifically set evap to purge in OL, I would think RR is no different with running these processes.
I need to get it inspected to get my registration for my specialty licence plate. I live in Texas and in the past the inspection was separate but legislature now combined them and called it the "Texas two step".:Eyecrazy:
I have tried everything suggested by Joecar in this thread but systems are still not ready https://forum.efilive.com/showthread.php?5321-Evaporative-purge-system-not-ready
The car is heavily modified and is a show/track car and these are not connected: evap purge solenoid (one on the engine), AIR pump and O2 sensor 2.
Do the sensors need to be plugged in for the test to try to run. In other words the circuit tests does not have a DTC but the performance of the system test is set to not reported thereby thinking it is ok? In my reading it looked like everything could be removed and set to not reported with MIL on and as soon as key on everything would report ready.
I'm running a roadrunner 512k 0411 COS5 open loop tune and specifically set evap to purge in OL, I would think RR is no different with running these processes.