PDA

View Full Version : Brake Torque Management


IJ.
October 26th, 2015, 06:30 PM
E38 12607218 OS T42 Auto

Is it able to be disabled in EFI-Live?

If so where do I look other than B2523?

Thanks guys..
GMPX
October 27th, 2015, 09:20 AM
Not sure what vehicle you have but turning off the TCS will also disable the BTM system anyway.
IJ.
October 27th, 2015, 09:36 AM
It's an Autocross car with VZ Commodore Electricals and electronics, TRAC is off but it's still doing the BTM thing.. thanks for the reply.
GMPX
October 27th, 2015, 09:42 AM
Ah ok, it is probably defaulting to staying on. I think (someone might dispute this) if you are using a Ute tune then this is what happens, on the sedan tune it is ok.
IJ.
October 27th, 2015, 09:49 AM
99% sure it's a Sedan tune, I'll check..
IJ.
October 27th, 2015, 11:43 AM
Ah ok, it is probably defaulting to staying on. I think (someone might dispute this) if you are using a Ute tune then this is what happens, on the sedan tune it is ok.

And that .1% bit me in the arse... it's been flashed as a Cab Chassis... :(

Can I use a Sedan VIN/File if I can find one and will it need to be licenced again?
joecar
October 27th, 2015, 12:01 PM
Can I use a Sedan VIN/File if I can find one and will it need to be licenced again?ECM is already licensed (license attaches to ECM's serial number).
IJ.
October 27th, 2015, 12:04 PM
ECM is already licensed (license attaches to ECM's serial number).

Thanks Joe!
GMPX
October 27th, 2015, 07:06 PM
Just find a sedan version with the same OS, turn off what you need for the conversion and I think you'll be fine.
IJ.
October 27th, 2015, 07:18 PM
Just find a sedan version with the same OS, turn off what you need for the conversion and I think you'll be fine.

Thanks for the help!

Just in case anyone here is interested this is the car>>

https://scontent-lax3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12079546_10207733985097390_3394140458458980973_n.j pg?oh=8a82b09677e9986d3f0f8203a11ef2f2&oe=56C11BBC