V2 Issue w/AD Ports

[TFZ_Z06]

So, I have 2 serial Widebands and 3 AD inputs. When I plug in the sensors for AD ports, and click record, logging won't start. As soon as I remove
the AD connection, the log starts. Anyone had this problem?

[joecar]

Which V2 firmware version...?

( which V8 build version...? )

[joecar]

Are you logging with V7 or V8...?

What is the voltage range of each of the devices you have connected to the AD inputs...?

[TFZ_Z06]

Firmware 2.07.91 V7 Build 293. and 0 to 5v.

[Blacky]

This update fixes that problem:
https://forum.efilive.com/showthread.php?26072-October-2015-EFILive-Public-Pre-Release

This is the comment about it in the "what's new" doc:
Fixed “Negative Response Error/5” when starting a pass-thru data log while AD1 is connected to a voltage signal of 1.2V or more.

If you need to log the AD inputs before you have a chance to update, you can start logging, pause the log, then connect the AD voltages, then continue logging.

Regards
Paul

[TFZ_Z06]

Downloaded. Thanks.