Error $01 with AV1/2/3/4 connected

[ViciousKnid]

If the AV1 port is being used I can not data log without getting error $01. I've tried 2 separate laptops. 2 plx boxes, 2 efi live boxes. As soon as I unplug the wideband from the EFI live box i can data log.

I can not find this error on the forum anywhere.

Most pre release 286 installed on both.

[Move'n Up]

Hope this helps
18995

[ViciousKnid]

Hmm. Shouldn't be that. One we used is a brand new V2 and then my older V2. Brand new cable which data logs fine without the wideband plugged in. No power inverter. Brand new plx afr box and my older one.

I suspect it's something to do with possibly the ground on the wideband. Not sure why. The truck is now about 60 miles from me.
Going to hook back up to my truck today that I've logged on for years to see if it can be replicated.

Weak ground is the only thing I can think of. Pretty stumped of it isn't that.
Power is ran to the fuse box.

Thanks for the reply. Where'd you find those codes at? Maybe I can find some more if this doesn't work.

[Move'n Up]

Could be a tough one but trying to replicate on another truck is a good idea!

Here you go, this is the full Error Code List.
http://content.efilive.com/documents/EFILive%20Error%20Codes.pdf

It's located on the Main EFI Live page under the drop down list Support and then Documentation/Tutorials
http://www.efilive.com/documentation-tutorials

[ViciousKnid]

Lmao. Of course it is. Completely failed to check the main page.
Thanks. I'll respond when I figure something out or even if I don't.

[joecar]

Please download and install this V7/V8: October-2015-EFILive-Public-Pre-Release

(https://forum.efilive.com/showthread.php?26072-October-2015-EFILive-Public-Pre-Release)

[ViciousKnid]

Same Problem on my truck. Looks like I last logged it on 9/24 and then did the pre release on 9/26 so the problem probably started with that.

Joe that new update now allows me to log with the AV1 plugged in However i'm no longer able to use the PID i need.
AFR PLX1 no longer activates apparently due to an error with the AD1 pid.
i checked the other wideband pre loaded pids and none of them will activate either due to an error with ad1
18996

[ViciousKnid]

I posted the image on the update thread.

[ViciousKnid]

Solved with update and fix number 3 here. I'm sure it'll be corrected in the next update as well.

Thanks everyone.

https://forum.efilive.com/showthread.php?26072-October-2015-EFILive-Public-Pre-Release

[joecar]

Ah, yes, thanks, sorry, I had meant to point you to the new sae_generic.txt file here:

Known-issues-with-the-October-2015-Public-Pre-Release (https://forum.efilive.com/showthread.php?26071-Known-issues-with-the-October-2015-Public-Pre-Release)