PDA

View Full Version : Max Torque out of range / 0, effect?



Boost
December 9th, 2015, 03:48 AM
I am looking over a tune that is having issues and one of the things I noticed right off that bat is Out of Range when loaded for all the Max Torque settings. They are actually at zero, a screenshot is attached. How could this have happened and what is the possible in any effect on performance? Thank you

joecar
December 9th, 2015, 05:18 AM
Set those to some in-range value (in between min+1 .. max-1).


When PCM hits an out-of-range value, it takes an additional execution path to handle the exception.

Boost
December 10th, 2015, 04:20 AM
I appreciate it! I will pause with this particular issue and focus on fueling because I suspect it may be a glitch.

What I mean is that I read it multiple times and in some cases there was a different value there.

I will keep it in the back of my mind but it may be something with the way I am doing things

GMPX
December 10th, 2015, 09:34 AM
Do you think someone has tuned it before?
What OS number is this and I'll have a look here at another stock tune.

Boost
December 12th, 2015, 09:12 AM
Do you think someone has tuned it before?
What OS number is this and I'll have a look here at another stock tune.

Yes someone has "attempted" to "tune" it. :hihi:

"Another" software was used. When I read it with "another" software, those settings are fine. With my first love software though ;) they are zeroed and O.O.R. warnings are given. That is why I'm not overly concerned with that particular issue, though curious.

Mods are:

Factory LS1 intake 3 bolt electronic TB
42lb injectors with 485LPH fuel pump
Factory heads but shaved down .040 (for higher compression)
Lunati double valve springs
Factory rockers and valves
Texas speed push rods
LS7 lifters
Texas speed MS3 cam
237/242 .603"/.609" 112LSA
New 30 over flat top Pistons (flycut .085)
Thinner head gasket (.040)
Factory crank
JBA shorty headers
Custom exhaust vibrant muffler
Custom intake w/ factory MAF sensor
Stage colder spark plugs